Italiano
Español
Deutsch
Français
36mm RFID tag nails TK4100
SKU
TR07C01
Nylon 36mm RFID tag nail for tree and timber identification TK4100 RFID chip read only LF 125 KHz.
- 500 pz to € 1.626 each 3% discount
- 1000 pz to € 1.464 each 13% discount
- 2000 pz to € 1.321 each 21% discount
The RFID tag tube is made of nylon and can be inserted into any hole on wood, plastic and masonry.
Fully waterproof IP68 is resistant to rust, wet environments and chemicals.
The assembly is done by drilling a hole, inserting the tag and eventually closing with resin. TK4100 RFID chip read only LF 125 KHz memory 64 bit.
APPLICATIONS
- Identification of trees and timber
- Tracking of pallets
- Logistics and inventories
Fully waterproof IP68 is resistant to rust, wet environments and chemicals.
The assembly is done by drilling a hole, inserting the tag and eventually closing with resin. TK4100 RFID chip read only LF 125 KHz memory 64 bit.
APPLICATIONS
- Identification of trees and timber
- Tracking of pallets
- Logistics and inventories
| Chip RFID | TK4100 |
|---|---|
| Chip Frequency | LF 125 KHz |
| Compatibility NFC | NO |
| Chip Manufacturer | Various |
| Material | Nylon |
| Dimension | Diameter 6 x 36 mm |
| Weight | 2,5 g |
| Chip functions | TK4100 is powered by an external coil in an alternating magnetic field and obtains the clock through one of the two contacts. The other contact of the coil turns the modulation current on and off; the chip sends 64 bits of information from its pre-programmed memory during manufacturing. In the TK4100 chip, data is modulated and transmitted with Manchester-encoded formatting. Chip programming is done with fusion lasers on polysilicon to store a unique code on each chip. The continuous output data string contains 9 leading 1 values, 40 bits, 14 parity bits, and 1 stop bit. No buffer capacitor is required because the control logic has very low power consumption. Only one external coil is needed to operate the chip. The parallel resonance capacitor of 74 pF is integrated into the chip. |
